View NC7WZU04P6XNL_5157122.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

nc7wzu04 ?tinylogic uhs dual unbuffered inverter ?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 j une 2008 nc7wzu04 tinylogic uhs dual unbuffered inverter features space saving sc70 6-lead package ultra small micropak leadless package unbuffered for crystal oscillator and analog applications balanced output drive: ?ma at 4.5v v cc broad v cc operating range: 1.65v to 5.5v low quiescent power: i cc < 1? at 5v v cc , t a = 25? general description the nc7wzu04 is a dual unbuffered inverter from fairchild? ultra high speed series of tinylogic in the space saving sc70 6-lead package. the special pur- pose unbuffered circuit design is intended for crystal oscillator or analog applications. the internal circuit consists of only one-stage, the output, to allow for this part to be used in these oscillator or analog applications. the device is fabricated with advanced cmos technol- ogy to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad v cc operating range. the device is specified to operate over the 1.65v to 5.5v v cc range. the inputs are high impedance when v cc is 0v. inputs tolerate voltages up to 7v independent of v cc operating voltage. ordering information all packages are lead free per jedec: j-std-020b standard. logic symbol order number package number pa ck ag e code t op mark package description supplied as nc7wzu04p6x maa06a zu4 6-lead sc70, eiaj sc88, 1.25mm wide 3k units on tape and reel nc7wzu04l6x mac06a b5 6-lead micropak, 1.0mm wide 5k units on tape and reel a 1 ieee/iec 1 y 1 a 2 y 2
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 2 nc7wzu04 ?tinylogic uhs dual unbuffered inverter connection diagrams pin descriptions function table y = a h = high logic level l = low logic level p ad assignments for micropak (top through view) (top view) pin one orientation diagram 1 a 1 aaa represents product code top mark ? see ordering code note: orientation of top mark determines pin one location. read the top product code mark left to right, pin one is the lower left pin (see diagram). aaa pin one (top view) pin assignment for sc70 a 1 y 1 1 6 gnd v cc 2 5 a 2 y 2 3 4 2 gnd 3 6 5 4 a 2 y 1 v cc y 2 pin name description a 1 , a 2 data inputs y 1 , y 2 outputs input output ay lh hl
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 3 nc7wzu04 ?tinylogic uhs dual unbuffered inverter absolute maximum ratings the ?bsolute maximum ratings?are those values beyond which the safety of the device cannot be guaranteed. the device should not be operated at these limits. the parametric values defined in the electrical characteristics tables are not guaranteed at the absolute maximum ratings. the ?ecommended operating conditions?table will define the conditions for actual device operation. recommended operating conditions (1) the recommended operating conditions table defines the conditions for actual device operation. recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. fairchild does not recommend exceeding them or designing to absolute maximum ratings. note: 1. unused inputs must be held high or low. they may not float. symbol parameter rating v cc supply voltage ?.5v to +7v v in dc input voltage ?.5v to +7v v out dc output voltage ?.5v to +7v i ik dc input diode current @ v in ?.5v ?0ma i ok dc output diode current @ v out < ?.5v v out > 0.5v, v cc = gnd ?0ma +50ma i out dc output current ?0ma i cc /i gnd dc v cc /gnd current ?00ma t stg storage temperature ?5? to +150? t j j unction temperature under bias 150? t l j unction lead temperature (soldering, 10 seconds) 260? p d po w er dissipation @ +85? sc70-6 micropak-6 215mw 215mw symbol parameter rating v cc supply voltage operating 1.8v to 5.5v v cc supply voltage data retention 1.5v to 5.5v v in input voltage 0v to 5.5v v out output voltage 0v to v cc t a operating temperature ?0? to +85? ja thermal resistance sc70-6 micropak-6 350?/w 350?/w
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 4 nc7wzu04 ?tinylogic uhs dual unbuffered inverter dc electrical characteristics symbol p arameter v cc (v) conditions t a = units +25? -40? to +85? min . typ. max . min. max. v ih high level input voltage 1.8 to 2.7 0.85 v cc 0.85 v cc v 3.0 to 5.5 0.8 v cc 0.8 v cc v il low level input voltage 1.8 to 2.7 0.15 v cc 0.15 v cc v 3.0 to 5.5 0.2 v cc 0.2 v cc v oh high level output voltage 1.65 v in = v il i oh = -100a 1.55 1.65 1.55 v 1.8 1.6 1.79 1.6 2.3 2.1 2.29 2.1 3.0 2.7 2.99 2.7 4.5 4.0 4.48 4.0 1.65 v in = gnd i oh = -2ma 1.29 1.52 1.29 v 2.3 i oh = -2ma 1.9 2.19 1.9 3.0 i oh = -4ma 2.4 2.82 2.4 3.0 i oh = -6ma 2.3 2.73 2.3 4.5 i oh = -8ma 3.8 4.24 3.8 v ol low level output voltage 1.65 v in = v ih i ol = 100a 0.01 0.2 0.2 v 1.8 0.01 0.2 0.2 2.3 0.01 0.2 0.2 3.0 0.01 0.3 0.3 4.5 0.01 0.5 0.5 1.65 v in = v cc i ol = 2ma 0.10 0.24 0.24 v 2.3 i ol = 2ma 0.12 0.3 0.3 3.0 i ol = 4ma 0.19 0.4 0.4 3.0 i ol = 6ma 0.29 0.55 0.55 4.5 i ol = 8ma 0.29 0.55 0.55 i in input leakage current 0 to 5.5 v in = 5.5v, gnd 0.1 1.0 a i cc quiescent supply current 1.65 to 5.5 v in = 5.5v, gnd 1.0 10 a i ccpeak p eak supply current in analog operation 1.8 v out = open v in = adjust for peak i cc current 0.2 ma 2.5 2 3.3 5 5.0 15
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 5 nc7wzu04 ?tinylogic uhs dual unbuffered inverter ac electrical characteristics note: 2. c pd is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (i ccd ) at no output loading and operating at 50% duty cycle. (see figure 2.) c pd is related to i ccd dynamic operating current by the expression: i ccd = (c pd )(v cc )(f in ) + (i cc static). ac loading and waveforms symbol parameter v cc (v) conditions t a = units figure number +25?c ?0? to +85? min. typ. max. min. max. t plh , t phl propagation delay 1.65 c l = 15pf, r l = 1m ? 1.5 5.5 9.8 1.5 11.0 ns figure 1 figure 3 1.8 1.5 4.6 8.1 1.5 8.9 2.5 ?0.2 1.2 3.3 5.7 1.2 6.3 3.3 ?0.3 0.8 2.7 4.1 0.8 4.5 5.0 ?0.5 0.5 2.2 3.3 0.5 3.6 3.3 ?0.3 c l = 50pf, r l = 500 ? , 1.2 4.0 6.4 1.2 7.0 ns figure 1 figure 3 5.0 ?0.5 0.8 3.4 5.6 0.8 6.2 c in input capacitance 0 3 pf c pd po w er dissipation capacitance 3.3 note 2 3.5 pf figure 2 5.0 5.5 t r = 3ns input output t plh input output figure 3. ac waveforms figure 1. ac test circuit figure 2. i ccd test circuit t f = 3ns v oh 90% 50% 50% 90% 10% 10% 50% 50% t phl t w v ol v cc v cc gnd r l c l * v cc *c l includes load and stray capacitance. input prr = 1.0mhz; t w = 500ns a input application note: when operating the nc7wzu04?s unbuffered output stage in its linear range, as in oscillator applications, care must be taken to observe maximum power rating for the device and package. the high drive nature of the design of the output stage will result in substantial simultaneous conduction currents when the stage is in the linear region. see the i ccpeak specification on page 2. input = ac waveform; t r , t f = 1.8ns; prr = 10mhz; duty cycle = 50%
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 6 nc7wzu04 ?tinylogic uhs dual unbuffered inverter tape and reel specification t ape format for sc70 t ape dimension inches (millimeters) package designator t ape section number cavities cavity status cover tape status p6x leader (start end) 125 (typ) empty sealed carrier 3000 filled sealed tr ailer (hub end) 75 (typ) empty sealed pa ck ag et ape size dim a dim b dim f dim k o dim p1 dim w sc70-6 8mm 0.093 (2.35) 0.096 (2.45) 0.138 0.004 (3.5 0.10) 0.053 0.004 (1.35 0.10) 0.157 (4) 0.315 0.004 (8 0.1)
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 7 nc7wzu04 ?tinylogic uhs dual unbuffered inverter tape and reel specification (continued) t ape format for micropak t ape dimension inches (millimeters) package designator t ape section number cavities cavity status cover tape status l6x leader (start end) 125 (typ.) empty sealed carrier 3000 filled sealed tr ailer (hub end) 75 (typ) empty sealed
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 8 nc7wzu04 ?tinylogic uhs dual unbuffered inverter t ape and reel speci?ation (continued) reel dimension for micropak inches (millimeters) t ape size abcdn w1 w2 w3 8mm 7.0 (177.8) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.331 + 0.059/?.000 (8.40 + 1.50/?.00) 0.567 (14.40) w1 + 0.078/?.039 (w1 + 2.00/?.00)
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 9 nc7wzu04 ?tinylogic uhs dual unbuffered inverter physical dimensions figure 4. 6-lead sc70, eiaj sc88, 1.25mm wide pa c kage drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package speci?ations do not expand the terms of fairchilds worldwide terms and conditions, speci?ally the warranty therein, which covers fairchild products. always visit fairchild semiconductors online packaging area for the most recent package drawings: http://www .f airchildsemi.com/pac kaging/ recommened land pattern
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 10 nc7wzu04 ?tinylogic uhs dual unbuffered inverter physical dimensions (continued) figure 5. 6-lead micropak, 1.0mm wide pa c kage drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package speci?ations do not expand the terms of fairchilds worldwide terms and conditions, speci?ally the warranty therein, which covers fairchild products. always visit fairchild semiconductors online packaging area for the most recent package drawings: http://www .f airchildsemi.com/pac kaging/ 2. dimensions are in millimeters 1. conforms to jedec standard m0-252 variation uaad mac06arevc notes: 3. drawing conforms to asme y14.5m-1994 top view side view recommened land pattern bottom view 1.45 1.00 a b 0.05 c 0.05 c 2x 2x 0.55 max. 0.05 c (0.49) (1) (0.75) (0.52) (0.30) 6x 1x 6x pin 1 detail a 0.075 x 45 chamfer 0.25 0.15 0.35 0.25 0.40 0.30 0.5 (0.05) 1.0 5x detail a pin 1 terminal 0.40 0.30 0.45 0.35 0.10 0.00 0.10 c b a 0.05 c c 0.05 c 0.05 0.00 5x 5x 6x (0.13) 4x 6x
?006 fairchild semiconductor corporation www.fairchildsemi.com nc7wzu04 rev. 1.0.4 11 trademarks the following includes registered and unregistered trademarks and service marks, owned by fairchild semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. acex build it now coreplus corepower crossvolt ctl current transfer logic ecospark efficentmax ezswitch * fairchild fairchild semiconductor fact quiet series fact fast fastvcore flashwriter ? fps f-pfs frfet global power resource sm green fps green fps e-series gto intellimax isoplanar megabuck microcoupler microfet micropak millerdrive motionmax motion-spm optologic optoplanar pdp spm power-spm powertrench programmable active droop qfet qs quiet series rapidconfigure saving our world, 1mw at a time smartmax smart start spm stealth superfet supersot -3 supersot -6 supersot -8 supremos syncfet the power franchise tinyboost tinybuck tinylogic tinyopto tinypower tinypwm tinywire serdes uhc ultra frfet unifet vcx visualmax * ezswitch and flashwriter are trademarks of system general corporation, used under license by fairchild semiconductor. disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. these specifications do not expand the terms of fairchild? worldwide terms and conditions, specifically the warranty therein, which covers these products. life support policy fairchild? products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems wh ich, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform w hen properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms datasheet identification product status definition advance information formative / in design this datasheet contains the design specifications for product development. specifications may change in any manner without notice. preliminary this datasheet contains preliminary data; supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice to improve design. no identification needed full production first production this datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice to improve the design. obsolete not in production this datasheet contains specifications on a product that is discontinued by fairchild semiconductor. the datasheet is for reference information only. rev. i34 nc7wzu04 ?tinylogic uhs dual unbuffered inverter

▲Up To Search▲

Price & Availability of NC7WZU04P6XNL

	To Download NC7WZU04P6XNL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .